How to Fit Stair Rods: A Step-By-Step Guide

Created by Joe Bloomfield, Modified on Mon, 30 Sep at 10:27 AM by Iain Biglin

 Stair rods make the ultimate finishing touch to your newly-fitted stair runner. Elegant and timeless, they help instantly add a beautiful, classic look to your home and are incredibly easy to install and DIY-friendly. Here we’ll tell you how to fit stair rods with our easy-to-follow tutorial.




If you haven’t yet installed your stair runner and underlay, check out our handy guides on how to lay underlay and how to install a stair runner first


 

Already got these laid and ready to go? - Let’s get started:


 

What You’ll Need:

  • Hacksaw
  • Screwdriver or combi drill 
  • Stair rods with brackets and screws.


How to fit your stair rods:


 

Step 1 - Cut your stair rods to the desired length. 


Unless you ordered your stair rods to be made to the exact length required, you will need to measure and cut them yourself. The length you cut them to will depend on the style of rod you have chosen, so make sure you check the product specification for guidance. Generally, your stair rod should measure 10-15cm longer than the width of your stair runner carpet, but make sure you are factoring in the added length of the finials before you start cutting. To cut your stair rod, simply remove the finials, measure to the desired length, and cut using a hacksaw.



Step 2 - Reattach the finials.


Slot or screw your finials back onto the ends of your trimmed stair rods and make sure they are fixed tightly.



Step 3 - Attach the brackets.


Slot your brackets onto your stair rods, one at each end as shown in the picture.



Step 4 - Position your rods.


Starting from the bottom step, begin placing your stair rods in position. Your brackets should sit at the edges of your stair runner as shown.



Step 5 - Screw into place.


Using your screwdriver or combi drill screwdriver attachment, screw your brackets into place. One screw will fix to the riser above the step while the other will fix into the tread. Make sure these are tightly fixed in place to prevent loosening and rattling over time. Repeat for each step, leaving out the very top and bottom landings.



And that’s how to fit your stair rods! Easy, right? We told you they were totally DIY-friendly. Now you can enjoy a staircase that looks every bit as grand as a manor house! Result. 


 

If you’re considering installing stair rods with your stair runner but need some inspiration styles, by all means, take look at our extensive stair rods collection. You’ll find lots of traditional and contemporary styles plus a huge range of classic and modern finishes to choose from, so you can match your rods to your stair carpet style and easily create your desired look. 


 


Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select at least one of the reasons
CAPTCHA verification is required.

Feedback sent

We appreciate your effort and will try to fix the article